lamp « emergence »low cut made with recycled wood.
detail of the upper part of the lampStainless steel lamp baserough wood look on lamppostrough wood look on upper part of the lamplight from emergence floor lampFaded wine colour on lamp base

Sofa corner lamp made from recycled wood »Emergence »

360.00  TTC

In this lamp stand the wiring is hidden in the central tube to keep its linear form and the light switch on the floor is easily accessible. A sphere with white glass and a led bulb gives out enough light to illuminate the room. A stainless steel disk hidden under the base of the lamp ensures great stability. Adjustable jacks are screwed into the steel plate to facilitate placement.

The curved vertical wood staves that come from the disassembled and recycled barrel sides are reassembled according to a specific process. The base comes from the lid of the barrel and is also reassembled according to a specific process.

Dimensions :

Height of the socket 100 cm. Total height with the 118 cm globe. Base diameter 35 cm. diameter of the globe 25 cm. 18w led bulb (equivalent to a 120 watt filament bulb) 8mm steel disc thickness.

delivery and lead time:

This model is stocked in small quantities. The delivery time is less than a week.


1 en stock

Product Description


This is the name of the flared base that characterizes this new range in the oak barrel furniture collection. Its weighted base ensures good stability giving it a light and aesthetic look. This sofa corner lamp made from recycled wood gives off a nice glow and is suitable for reading looking at TV or chatting to friends.

Origin of the wood: Recycled split oak (or stave) wood from casks or barrels of 225 liters. The vertical wood staves of the barrel are used for the upright part of the lamp. The lid of the barrel is used for the base.

Manufacturing: or the different stages of recycling. The vertical staves of wood are calibrated in width and then chamfered and glued together for part of the length. This part is then pierced and a stainless steel tube is inserted. The tube is fixed on a metal disc covered with a wooden board. The lid of the barrel is used to make the board. Before reaching this stage the wood staves are taken apart and each piece of wood is flattened and planed. The board is reformed by gluing the various elements after machining each part.

Wood finish: Brushed then varnished with a bi-component and water-soluble product. The colours vary according to the origin of the wine and the work done on the wood.